耐磨和耐腐蚀涂层
修力宝WR204耐磨涂层
产品特点:
- 陶瓷微球和矽合金填充双组分环氧树脂涂料.
- 适合在垂直表面上的应用.
- 涂层具有很强的附着力和耐磨损和冲击性的优良性能.
应用:
- 专为重建和预保护机器被漩涡磨损，腐蚀和气蚀,水泵叶轮，壳体，引风机叶轮等
技术数据:
| 颜色 | ： | 深灰色 |
| 抗压强度 | ： | 15954 psi (1122 kg/cm²) |
| 拉伸强度 | ： | 4351 psi (306 kg/cm²) |
| 剪切强度 | ： | 2176 psi (153 kg/cm²) |
| 硬度 | ： | 90 Shore D |
| 温度范围 | ： | -50 °C (-58 °F) to至 121 °C (250 °F) |
| 混合物（A：B） | ： | 重量– 4:1 / 容积– 4:1 |
| 适用期 | ： | 40分钟 |
| 使用之前最小固化时间 | ： | 50%负荷 – 10小时 100%负荷 – 24 小时 |
| 覆盖面积（每套） | ： | 378 cm² 于 6 mm 的厚度 |
SEALXPERT WR206 WEAR SHIELD BRUSHABLE COATING (LARGE PARTICLES)
FEATURES:
- Alumina ceramic bead-filled epoxy system
- Outstanding abrasion resistance
- Designed for particulates larger than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes
- Recontour chippers, bins, hoppers, bunkers, separators, diester tables
- Protect exhausters, chutes, launderers, housing fans, crushers, and breakers
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,210 psi (296 kg/cm2) |
| Shear Strength | : | 1,474 psi (104 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR208 WEAR SHIELD BRUSHABLE COATING (SMALL PARTICLES)
FEATURES:
- Micro-alumina ceramic bead-filled epoxy
- Outstanding abrasion resistance
- Designed for particulates smaller than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,300 psi (303 kg/cm2) |
| Shear Strength | : | 1,375 psi (97 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR209 CORROSION BRUSHABLE COATING
FEATURES:
- Excellent chemical resistance to acids, solvents, and alkalis
- Temperature resistance to 160°C (320°F)
- Applies easily with short-bristle brush or roller
- Low viscosity, self-leveling liquid
APPLICATION:
- Seal and protect new equipment exposed to erosion and corrosion
- Protect pump casings, impeller blades, gate valves, water boxes, and fan blades
- Rebuild heat exchangers, tube sheets, and other water circulating equipment
- Top coat for providing exceptionally smooth surface to repaired surfaces
TECHNICAL DATA:
| Colour | : | Brown |
| Compressive Strength | : | 15,000 psi (1,069 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 1,450 psi (102 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 66°C (150°F) / Dry: 160 °C (320 °F) |
| Mixture (A:B) | : | Weight – 5.6:1 / Volume – 3.4:1 |
| Pot Life | : | 40 min |
| Coverage area (per set) | : | 7,200 cm2 at 0.375 mm thickness |
SEALXPERT WR210 CARBIDE PUTTY
FEATURES:
- Silicon carbide-filled epoxy putty
- Economical protection against wear and abrasion
- Designed for particulates smaller than 1.6mm (1/16”)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Particulate less than 1/16″: pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 8,160 psi (574 kg/cm2) |
| Tensile Strength | : | 2,640 psi (186 kg/cm2) |
| Shear Strength | : | 1,350 psi (95 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 49°C (120°F) / Dry: 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 8:1 / Volume – 4:1 |
| Pot Life | : | 50 min |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
修力宝WR211防腐涂层
产品特点:
- 改性环氧树脂，耐磨陶瓷和晶体矿物粉组成
- 触变性粘度，适用于垂直表面的应用
- 优良的耐强碱和酸性
应用:
- 用于重建和保护金属材料和混凝土设施免受酸/碱溶液腐蚀
- 各种腐蚀管道，泵，阀，热交换器等的重建和保护涂层
技术数据
| 颜色 | : | 深灰色 |
| 抗压强度 | : | 13053 psi (918 kg/cm2) |
| 拉伸强度 | : | 4351 psi (306 kg/cm2) |
| 剪切强度 | : | 1450 psi (102 kg/cm2) |
| 硬度 | : | 73 Shore D |
| 温度范围 | : | -50 °C (-58 °F) 至 121 °C (250 °F) |
| 混合物（A：B） | : | 重量 – 5:1 / 容积 – 4:1 |
| 适用期 | : | 60 分钟 |
| 覆盖面积（每套） | : | 378 cm2 于 6 mm 的厚度 |
60 KAKI BUKIT PLACE, #09-11 EUNOS TECHPARK, SINGAPORE 415979
