EPOXY COATING & MARINE CHOCK
NS38 ANTI-SLIP FLOOR COATING
FEATURES:
- Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)
- Easy and fast to apply by paint brush or roller
- Reduces accidents (slips and falls) in the workplace
- Fire retardant in the cured state
- Resists gasoline, oil, acids, alkalis and aliphatic solvents
- Available in yellow, grey or green
APPLICATION:
- Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs
TECHNICAL DATA:
| Volume of solids | : | 62 % |
| Mix ratio – by weight | : | 7.5:1 |
| Mix ratio – by volume | : | 4.4:1 |
| Coverage – Roller | : | 4.6 m² per 3.78 l (50 ft²/gal) |
| Coverage – Trowel | : | 3.7 m² per 3.78 l (40 ft²/gal) |
| Dry time at 21°C | : | 12 hours |
EFC38 EPOXY FLOOR COATING
FEATURES:
- Two-component epoxy floor and deck coating
- Easy and fast to apply
- Fire retardant in the cured state
- Resists gasoline, oil, acids, alkalis and aliphatic solvents
APPLICATION:
- Finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs
TECHNICAL DATA:
| Volume of solids | : | 62 % |
| Mix ratio – by weight | : | 7.5:1 |
| Mix ratio – by volume | : | 4.4:1 |
| Coverage – Roller | : | 4.6 m² per 3.78 l (50 ft²/gal) |
| Coverage – Trowel | : | 3.7 m² per 3.78 l (40 ft²/gal) |
| Dry time at 21°C | : | 12 hours |
MC38 MARINE CHOCK
FEATURES:
- Two-part pourable chocking compound with excellent mechanical strength
- Allow pouring up to 80mm thickness
- High compressive strength and impact strength
- Excellent resistant to chemicals
- Applicable to mounting main engines, auxiliary gears, compressors, pumps, thrust and support bearings, etc.
APPLICATION:
- Developed for chocking marine main propulsion and auxiliary machinery
- Also used for sterntube and strut bearings, pintle and rudder bearings, pedestal bearings, steering gears, stern winches, engine room pumps, cargo pumps, cable penetrations, large ball or roller bearings, bow thrusters and anchor windlasses
TECHNICAL DATA:
| Volume of solids | : | 62 % |
| Mix ratio – by weight | : | 5:1 |
| Mix ratio – by volume | : | 3.4:1 |
| Coefficient of linear thermal expansion | : | 43.8 x 10⁻⁶ 1/K |
| Compressive strength | : | 164 N/mm2 |
| Tensile strength | : | 49.4 N/mm2 |
| Pot life | : | 30 min. @ 25°C / 10 min. @ 50°C |
| Cure time | : | 48 hours @ 16°C / 28 hours @ 21°C |
| Hardness – Shore D | : | 83 |
| Dry time at 21°C | : | 12 hours |
ACC10 ANTI-CORROSIVE EPOXY COATING
FEATURES:
- Two-component
- High adhesion strength
- Excellent alkali and acid resistance
APPLICATION:
- FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.
TECHNICAL DATA:
| Colour | : | Clear |
| Mix ratio – by weight | : | 3.3:1 |
| Mix ratio – by volume | : | 2.5:1 |
| Density | : | 1.07 |
ACU10 UNDERWATER EPOXY COATING
FEATURES:
- Two-component epoxy repair compound
- Provides a rock-hard protective surface
- Provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood
APPLICATION:
- Designed to be applied in underwater and splash zone environments
- Repair boat hulls, buoys, seawalls, docks, bridge abutments, etc.
TECHNICAL DATA:
| Colour | : | White |
| Pot life | : | 65 min |
| Flash point | : | > 121°C (250°F) |
| Hardness | : | 72 Shore D |
53 Ubi Avenue 1, #05-25 Paya Ubi Industrial Park, Singapore 408934
