ACTIVE LEAK REPAIR KIT

WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

FEATURES:

  • Repairs under active leak up to 150 psi (11 kg/cm2) pressure
  • No shutdown required
  • Works on any metal or non-metal pipes
  • Applicable to pipes up to 18″ (457 mm) diameter
  • Repairs leak in 15 minutes
  • Withstand pressure up to 500 psi (35 kg/cm2)
  • Withstand temperature up to 200 °C (392 °F)
  • Safe for drinking water and resistant to most chemicals
  • Ideal for pipeline reinforcement

APPLICABLE MATERIAL:

  • Steel
  • Copper
  • Aluminium
  • Galvanized steel
  • PVC
  • CPVC
  • Stainless steel
  • Polyethylene
  • Polypropylene
  • Cast-iron
  • Concrete
  • FRP/GRE

CHEMICAL RESISTANCE:

  • Oil
  • Water (drinking water, wastewater, steam)
  • Solvents (acetone, toluene, MEK, ethyl alcohol)
  • Mild acids (hydrochloric acid, sulfuric acid) and alkalis
  • Chemical (ethylene glycol, xylenes, ammonia)
  • Hydrocarbons
  • Bases
  • Slurries
  • Fuels (petroleum, diesels, gasoline)
  • Gases (LNG, LPG)
  • Organic salts

WORKING TIME (FIBERGLASS TAPE):

1 minute at 30 °C (86 °F)

CURING TIME:

  • 30 minutes at 30 °C (86 °F)
  • Heat may be applied to decrease curing time
  • Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

  • Pipe repairs
  • active pipe leaks
  • sealing joints
  • hazardous material spill control
  • reinforce thinning walls
  • Repairs in hard to reach areas
  • Underwater repairs

OPERATING TEMPERATURE:

-50 °C (-58 °F) to 200 °C (392 °F)

OPERATING PRESSURE:

  • Recommended for pressure up to 500 psi (35 kg/cm2)
  • (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

appli 1 - ACTIVE LEAK REPAIR KIT (AR)Building & amp; Facilities
appli 2 - ACTIVE LEAK REPAIR KIT (AR)Electronics
appli 3 - ACTIVE LEAK REPAIR KIT (AR)Industrial Processing
appli 4 - ACTIVE LEAK REPAIR KIT (AR)Irrigation
appli 5 - ACTIVE LEAK REPAIR KIT (AR)Oil & amp; Gas
appli 6 - ACTIVE LEAK REPAIR KIT (AR)Chemical
appli 7 - ACTIVE LEAK REPAIR KIT (AR)Manufacturing Plants
appli 8 - ACTIVE LEAK REPAIR KIT (AR)Marine
appli 9 - ACTIVE LEAK REPAIR KIT (AR)Military
appli 10 - ACTIVE LEAK REPAIR KIT (AR)Offshore
appli 11 - ACTIVE LEAK REPAIR KIT (AR)Food Processing
appli 12 - ACTIVE LEAK REPAIR KIT (AR)Petrochemical
appli 13 - ACTIVE LEAK REPAIR KIT (AR)Pharmaceutical
appli 14 - ACTIVE LEAK REPAIR KIT (AR)Power Generation
appli 15 - ACTIVE LEAK REPAIR KIT (AR)Pulp & amp; Paper
appli 16 - ACTIVE LEAK REPAIR KIT (AR)Wastewater
appli 17 - ACTIVE LEAK REPAIR KIT (AR)Water Distribution
 
 
 

 

 

TECHNICAL DATA:

Tensile strength:3920 psi (276 kg/cm2)
Bond strength:230 psi (16 kg/cm2)
Tensile elongation:1.2 % ± 0.7 %
Compression strength:13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength:2260 psi (159 kg/cm2)
Cured hardness:82 Shore D
Dielectric strength:400 Volts/mil
Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2) 10 plys150 psi (11 kg/cm2) 15 plys400 psi (28 kg/cm2) 20 plys
½” (15mm)1 A1 A1 A
¾” (20mm)1 A1 A1 A
1″ (25mm)1 A1 A2 A
1¼” (32mm)1 A2 A3 A
1½” (40mm)2 A2 A1 B
2″ (50mm)1 B1 B1 B
2½” (65mm)1 B1 B2 C
3″ (80mm)1 B2 C2 C
4″ (100mm)1 B2 C3 C

 

Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2) 10 plys150 psi (11 kg/cm2) 15 plys400 psi (28 kg/cm2) 20 plys
5″ (125mm)2 C2 C3 C
6″ (150mm)2 C2 C4 C
8″ (200mm)2 C3 C5 C
10″ (250mm)3 C4 C6 C
12″ (300mm)4 C5 C8 C
14″ (350mm)4 C6 C8 C
16″ (400mm)5 C7 C9 C
18″ (450mm)5 C8 C9 C
> 18″ (450mm)Contact SealXpert for recommendations

 

Roll sizeA
(2″ x 5′)
(50mm x 1.2m)		A
(2″ x 6′)
(50mm x 1.8m)		B
(2″ x 12′)
(50mm x 3.6m)		B
(3″ x 9′)
(75mm x 2.7m)		C
(4″ x 12′)
(100mm x 3.6m)

WRAP SEAL ULTRA ACTIVE LEAK REPAIR PROCEDURE:

1active pro 1 - ACTIVE LEAK REPAIR KIT (AR)Minimize the flow rate and reduce system pressure
2active pro 2 - ACTIVE LEAK REPAIR KIT (AR)Roughen the area to be repaired
3active pro 3 - ACTIVE LEAK REPAIR KIT (AR)Knead the Seal Stic
 
4active pro 4 - ACTIVE LEAK REPAIR KIT (AR)Place the Seal Stic away from the leak location
5active pro 5 - ACTIVE LEAK REPAIR KIT (AR)Start wrapping the SealXpert Ultra Sealing Tape a few distances away from the leak location
6active pro 6 - ACTIVE LEAK REPAIR KIT (AR)Continue to wrap SealXpert Ultra Sealing Tape onto pipe while pushing the Seal Stic onto leak location
 
7active pro 7 - ACTIVE LEAK REPAIR KIT (AR)Immerse Wrap Seal Fiberglass Tape into water
8active pro 8 - ACTIVE LEAK REPAIR KIT (AR)Wrap the Wrap Seal Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll
9active pro 9 - ACTIVE LEAK REPAIR KIT (AR)Discard the plastic tube at the end of the roll
 

10active pro 10 - ACTIVE LEAK REPAIR KIT (AR)Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

1512 Active Leak Repair - ACTIVE LEAK REPAIR KIT (AR)

PACKAGE:

  • 1 roll of Wrap Seal Fiberglass Tape
    • 2″ x 6′ (50 mm x 1.8 m)
    • 2″ x 12′ (50 mm x 3.6 m)
    • 3″ x 9′ (75 mm x 2.7 m)
    • 4″ x 12′ (100 mm x 3.6 m)
  • 1 roll of SealXpert Ultra Sealing Tape
    • 1″ x 16′ (25 mm x 5 m)
    • 1″ x 16′ (25 mm x 5 m)
    • 1¼” x 16′ (32 mm x 5 m)
    • 2″ x 16′ (50 mm x 5 m)
  • 1 unit of Seal Stic Quick Cure Epoxy
  • 1 pair of latex gloves
  • Operating instruction
Download PDF download pdf - ACTIVE LEAK REPAIR KIT (AR)