WEAR & CORROSION RESISTANT COATING AND PUTTY
SEALXPERT WR204 WEAR RESISTANT COATING
FEATURES:
- Ceramic microsphere and silicon alloy filled two-component epoxy coating.
- Suitable for application on vertical surfaces.
- Coating has strong adhesion and excellent properties of wear and impact resistance.
APPLICATION:
- Designed to rebuild and pre-protect the machine worn by whirlpool, corrosion and cavitation erosion, water pump impellers, shell, induced-draft fan impeller etc.
TECHNICAL DATA:
| Colour | : | Dark Grey |
| Compressive Strength | : | 15,954 psi (1,122 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 2,176 psi (153kg/cm2) |
| Hardness | : | 90 Shore D |
| Temperature Range | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 4:1 / Volume – 4:1 |
| Pot Life | : | 40 min |
| Min. curing before function | : | 50% load – 10 hours 100% load – 24 hours |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
SEALXPERT WR206 WEAR SHIELD BRUSHABLE COATING (LARGE PARTICLES)
FEATURES:
- Alumina ceramic bead-filled epoxy system
- Outstanding abrasion resistance
- Designed for particulates larger than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes
- Recontour chippers, bins, hoppers, bunkers, separators, diester tables
- Protect exhausters, chutes, launderers, housing fans, crushers, and breakers
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,210 psi (296 kg/cm2) |
| Shear Strength | : | 1,474 psi (104 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR208 WEAR SHIELD BRUSHABLE COATING (SMALL PARTICLES)
FEATURES:
- Micro-alumina ceramic bead-filled epoxy
- Outstanding abrasion resistance
- Designed for particulates smaller than 3mm (1/8”)
- Resistant to wide range of chemicals (acids, bases, saturated salt solutions, oils, etc.)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 11,000 psi (774 kg/cm2) |
| Tensile Strength | : | 4,300 psi (303 kg/cm2) |
| Shear Strength | : | 1,375 psi (97 kg/cm2) |
| Hardness | : | 87 Shore D |
| Temperature Range | : | Wet: 60°C (140°F) / Dry: 149 °C (300 °F) |
| Mixture (A:B) | : | Weight – 2:1 / Volume – 2:1 |
| Pot Life | : | 30 min |
| Coverage area (per set) | : | 5,000 cm2 at 6 mm thickness |
SEALXPERT WR209 CORROSION BRUSHABLE COATING
FEATURES:
- Excellent chemical resistance to acids, solvents, and alkalis
- Temperature resistance to 160°C (320°F)
- Applies easily with short-bristle brush or roller
- Low viscosity, self-leveling liquid
APPLICATION:
- Seal and protect new equipment exposed to erosion and corrosion
- Protect pump casings, impeller blades, gate valves, water boxes, and fan blades
- Rebuild heat exchangers, tube sheets, and other water circulating equipment
- Top coat for providing exceptionally smooth surface to repaired surfaces
TECHNICAL DATA:
| Colour | : | Brown |
| Compressive Strength | : | 15,000 psi (1,069 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 1,450 psi (102 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 66°C (150°F) / Dry: 160 °C (320 °F) |
| Mixture (A:B) | : | Weight – 5.6:1 / Volume – 3.4:1 |
| Pot Life | : | 40 min |
| Coverage area (per set) | : | 7,200 cm2 at 0.375 mm thickness |
SEALXPERT WR210 CARBIDE PUTTY
FEATURES:
- Silicon carbide-filled epoxy putty
- Economical protection against wear and abrasion
- Designed for particulates smaller than 1.6mm (1/16”)
- Service temperatures up to 150°C (302°F)
APPLICATION:
- Particulate less than 1/16″: pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes
TECHNICAL DATA:
| Colour | : | Grey |
| Compressive Strength | : | 8,160 psi (574 kg/cm2) |
| Tensile Strength | : | 2,640 psi (186 kg/cm2) |
| Shear Strength | : | 1,350 psi (95 kg/cm2) |
| Hardness | : | 85 Shore D |
| Temperature Range | : | Wet: 49°C (120°F) / Dry: 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 8:1 / Volume – 4:1 |
| Pot Life | : | 50 min |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
SEALXPERT WR211 CORROSION RESISTANT COATING
FEATURES:
- Composed of modified epoxy, wear resistant ceramic and crystal mineral powder
- Thixotropic viscosity, suitable for application on vertical surface
- Excellent resistance to strong alkali and acid
APPLICATION:
- Used for rebuilding and protecting metal material and concrete facilities against corrosion of acid/alkali solution
- Rebuilding and protective coating of various corroded pipeline, pump, valve, exchanger, etc.
TECHNICAL DATA:
| Colour | : | Dark Grey |
| Compressive Strength | : | 13,053 psi (918 kg/cm2) |
| Tensile Strength | : | 4,351 psi (306 kg/cm2) |
| Shear Strength | : | 1,450 psi (102 kg/cm2) |
| Hardness | : | 73 Shore D |
| Temperature Range | : | -50 °C (-58 °F) to 121 °C (250 °F) |
| Mixture (A:B) | : | Weight – 5:1 / Volume – 4:1 |
| Pot Life | : | 60 min |
| Coverage area (per set) | : | 378 cm2 at 6 mm thickness |
53 Ubi Avenue 1, #05-25 Paya Ubi Industrial Park, Singapore 408934
